Saeco DUALLY CAP030A Manuel D'opération page 84

English
Do not use adapters or
multi-sockets.
Depending on the
regulations in force in the
Country where the machine
is being used, the cable
connecting to the power
supply has to be pre-set or
equipped with an all-pole
switch (with a minimum
contact opening of 3 mm),
or with a plug complying
with the same regulations.
The all-pole switch must
be suitable for machine
input and be able to detect
all voltage polarities.
Make sure that the power
cord plug is easily
reachable after installation.
84