Saeco DUALLY CAP030A Manuel D'opération page 90

English
• If machine does not detect water into circuits, a pump
priming alert will be shown: press on image and wait for
automatic priming procedure completition.
Repeat the rinsing of the circuits on the other side of the
machine, so that both sides are rinsed, then proceed.
Hot water and steam
may cause
Follow
WARNINGS
instructions described
in chapter
knob" to:
• Dispense a cup of water by pressing the corresponding
display button.
90
• Open the steam knob for around 20".
When the hot water dispensing procedure has been
completed, empty the container. Fill the water tank again
up to the MAX level.
The machine is now ready for use.
scalding!
the
7.4
and
"Steam
The beverage selection modes are indicated in
chapter "Operation and Use".
Using the Appliance
Before using the machine,
read this manual carefully
and make sure users are
familiar with the machine.
After the machine has not
been used for a certain
time, it is recommended to
read section "First Use -
Use after a Long Period of
Inactivity" again,
using the module again.
before