Kärcher MC 50 Mode D'emploi page 49

6 Before Startup
6.1 Prior to initial start-up
 Attach the document pouch to the rear window as in-
structed in the enclosed instructions.
6.2 Refuelling
Danger
Risk of explosion!
– Do not refuel the machine in enclosed spaces.
– Smoking and open flames must be strictly avoided.
– Ensure that no fuel reaches the hot open surfaces.
 Switch off engine.
 Open fuel filler cap.
 Fill in diesel.
Only use the fuels specified in the Operations Manual.
 Insert the fuelling gun as deep as possible into the fuel
nozzle. Do not add any more fuel once the fuelling gun
stops according to the settings.
 Wipe off any spilt fuel and close fuel filler cap.
6.2.1 Fuelling using a can
– Estimate the fuel requirement in order to avoid over-
flows.
6.3 Fill the windshield wiper system
1 Container windshield washer system
2 Cover
 Remove the lid.
 Fill in liquid.
 Close the lid.
6.4 Fill water reservoir (for sweeper)
 Unscrew the lid of the filler neck for fresh water.
 Fill the water reservoir.
NOTICE
Do not insert the water hose to fill the water tank (avoids
water getting sucked back in).
 Shut off water supply.
 Remove the water supply hose and close the filler neck
for fresh water.
6.4.1 With a water circulation system (option)
 Fill water into the waste container (max. 50 litres).
6.5 Adjusting driver's seat
DANGER
Danger of accident. Do not adjust the driver's seat while
driving.
6.5.1 Standard seat
1 Lever for seat adjustment
2 Rotary handle for spring resistance
3 Inclination adjustment back rest
4 Display of spring setting
5 Adjustment wheel arm rest height
 Sit on the driver's seat.
 Pull the seat adjustment lever up and slide the seat into
the desired position.
 Release the seat adjustment lever and lock the seat in
place.
 Set the inclination of the back-rest with the rotary han-
dle for back-rest inclination.
 Adjust the height of the arm rests via the adjustment
wheels.
 Adjust the rotary handle of the spring resistance so that
the pointer of the spring resistance display is in the
green area.
6.5.2 Comfort seat (optional)
1
2
1 Lever for seat adjustment
2 Height adjustment
To lower: Pull out the knob
To lift: Push the knob (while the motor is running)
3 Inclination adjustment back rest
12
-
EN
4
3
49