Kärcher MC 50 Mode D'emploi page 44

5.3 Steering column
1 Ventilation
2 Indicator lamp for direction indicator
3 Switch for warning system
4 Clamp screw for steering wheel height adjustment
5 Operating hours counter, working hydraulics
6 Indicator lamp for parking brakes
7 Display, float position AUX 1
8 Clamp screw for steering wheel inclination adjustment
9 Display, float position, front power lifter
10 Multi-functional lifter for lights, indicators and horn
5.3.1 Multi-functional lifter for lights,
indicators and horn
– Horns: Press the lever up
– Indicator: Lever to the right of left
– Parking light and dipped beam: Rotate the ring (anti-
clockwise)
– High beam: Push the lever forward with the dipped
beam switched on
– Flasher: Pull the lever backwards
5.4 Pedals
1 Brake pedal
2 Locking mechanism of brake pedal (emergency brake)
3 Stop work speed
4 Accelerator pedal, forwards
5 Accelerator pedal, reverse
5.4.1 Apply parking brake
 Press the brake pedal all the way.
 Put the lock.
 Release the brake pedal.
44
5.4.2 Release parking brake
 Press the brake pedal all the way.
 Unlock the lock.
 Release the brake pedal.
5.5 Lowering speed control valve (option)
The rotary knob for the lowering speed is used to adjust
the lowering speed of the front implement frame.
1 Rotary knob lowering speed control valve
5.5.1 Rotary knob lowering speed front power lift
A Direction of rotation "Increase lowering speed"
B Direction of rotation "Decrease lowering speed"
 Turning into the direction of rotation B to the limit stop
locks the front power lift.
Note
Is required for transport runs on public roads in order to
lock the front power lift and thus the lowering of the at-
tachments.
5.6 Ceiling panel
1 Switch for windshield wiper, 2 steps
2 Switch for beacon warning lamp
3 Switch for working lamp
4 Switch for option (e.g. heated outside mirrors)
5 Button for windshield wiper system
7
-
EN