Sentiotec PROD-BT-B Instructions D'installation Et D'utilisation page 27

Installation instructions
4.2. Connecting the device
Note Figure 3.
1. Connect the 2-pin cable to the terminals marked "5V
● Plug the black cable into the terminal marked "GND" and the red cable
into the terminal marked "V+".
2. Connect the cable to the jack plug of the power supply unit.
3. Connect the loudspeaker cables (max. 3 m) to the terminals marked
" SPEAKER": connect the cables of the right speaker to terminals "R" and
the cables of the left speaker to terminals "L".
● Plug the black cable into the terminals marked "-" and the red cables
into the terminals marked "+".
4. If you want to use an audio system for music playback, connect the "LINE OUT"
output of the Bluetooth module to the line-in (aux-in jack) of the audio system.
Use a cable resistant to temperatures up to 150 °C (NOT included).
4.3. Installing the device
1. Insert the device into the mounting hole.
2. Screw the unit through the holes to the cabin wall using the four wood
screws provided.
3. Gently press the front panel into the housing. Ensure that the lower catches
engage noticeably.
Figure 4: Mounting the front cover
p. 9/18
".
DC
EN