Instructions for use
5.2. Establishing a connection for the first time (pairing)
Observe the operating instructions for your audio source (mobile phone,
tablet, etc.)
1. Plug the plug-in power supply of the ProD Bluetooth into an electrical socket
(230 V).
► The indicator LED 1 on the ProD Bluetooth flashes alternately red and
blue for approx. 3 minutes (pairing mode).
► After pairing, the ProD Bluetooth switches to standby mode. The indicator
LED 1 on the ProD Bluetooth flashes blue slowly.
► Press the forward button for 3 seconds to return to pairing mode.
2. Turn on the audio source (mobile phone, tablet, etc).
3. Turn on the Bluetooth function of the audio source.
If your audio source does not automatically search for Bluetooth devices
in the area, start the search manually by selecting "Search for devices"
or a similarly named function.
► Most devices automatically search for and display other Bluetooth de-
vices in the area.
► The ProD Bluetooth is displayed on the audio source with the name
"sentio.BT xxx".
► xxx is the device's own identification number (e.g. E2D)
4. Select "sentio.BT xxx" from the device list shown on the audio source.
► The Bluetooth connection between the audio source and the ProD Blue-
tooth is established for the first time (= pairing).
► The indicator LED 1 on the ProD Bluetooth lights up blue.
► The ProD Bluetooth is connected and ready to use.
5. Play music with the audio player of your audio source.
► The music is played from the speakers connected to the ProD Bluetooth.
p. 11/18
EN