Publicité
Les langues disponibles
Les langues disponibles
Instructions for use
Switching to an audio source that was previously paired
The Bluetooth module stores the pairing information of the last eight audio sources.
To connect the Bluetooth module to a device it had previously been paired with,
you only need to perform the following steps:
1. Disconnect the Bluetooth connection between the previous audio source
and the ProD Bluetooth. Follow the operating instructions for your device.
2. Manually establish a Bluetooth connection between the new audio source
and Bluetooth module:
● Select "sentio.BT xxx" from the list of paired devices.
Only one device can be actively connected to the ProD Bluetooth at a time.
5.9. Answering a call while music is playing
An incoming call on the connected device is forwarded to the ProD Bluetooth and
signalled by a call tone. If you want to answer the call, briefly press the Forward
button 6. The music is then automatically interrupted and resumed after the call.
If the indicator LED flashes purple, the microphone is activated.
5.10. Using voice recognition
Follow the operating instructions for your device. Depending on the activated
functions, these can be selected using the built-in microphone of the ProD Blue-
tooth (e.g. call a contact, answer a call, play the next song on the playlist, create
reminders etc.).
1. Press the Forward button 6 for 3 seconds to activate the microphone
(push to talk).
► The indicator LED 1 on the ProD Bluetooth flashes purple and a signal
tone sounds.
p. 14/18
Publicité
