Internal Gasket Replacement - Napoleon HIGH COUNTRY NZ3000H Instructions D'installation Et D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

48
9.7

INTERNAL GASKET REPLACEMENT

EN
ALL INTERNAL COMPONENTS ARE HEAVY. IT IS RECOMMENDED TO PROVIDE SUPPORT FOR
It is recommended that the gaskets of your appliance be replaced every 6-10 years or when stove
emissions seem to increase.
1
Remove all the bricks panels inside of the
appliance. See STEP 2 for brick removal order.
3
Remove front two nuts and bolts as shown.
5
Slide secondary air manifold downward
and out to remove. Scrape off gasket from rear
and clean surface. Secure new gasket with high
W415-1517 / A / 09.02.16
COMPONENTS WHERE NEEDED WHEN INSTALLING.
temp silicone (not supplied).
2
X2
Remove Bricks in the order shown above.
4
X9
6
Reach in through the opening of the bypass
Remove two rear bolts.
door to access fasteners.
X2

Publicité

Table des Matières
loading

Table des Matières