Door Gap Adjustment - Napoleon HIGH COUNTRY NZ3000H Instructions D'installation Et D'utilisation

27

6.3.4 DOOR GAP ADJUSTMENT

EN
The door gap for the NZ3000H (see graphic below) can be set by adjusting the hinges of each door ( x4).
Each hinge contains a set screw located on the side of the hinge. Loosen the set screw and turn the slotted
hinge pin to create an even gap. Each hinge can be adjusted independently.
HINGES X4
Door gap and hinge location
Top Gap
Bottom Gap
W415-1517 / A / 09.02.16