maintenance
EN
9.8
internal gasket replacement
WARNING
!
•
All internal components are heavy. It is recommended to provide support for components where needed when
installing.
It is recommended that the gaskets of your appliance be replaced every 6-10 years or when stove emissions
seem to increase.
1
Remove all brick panels. See Step 2 for removal order.
3
Remove front two nuts and bolts as illustrated above.
5
Slide secondary air manifold downward and out to
remove. Scrape off gasket from rear and clean surface.
Secure new gasket with high temperature silicone (not
46
W415-2044 / 02.14.20
supplied).
2
Remove brick in order illustrated above.
4
Remove two rear bolts.
6
Reach in through the opening of the bypass door to
access nuts.
x2