Electrical Connection Of The Motor - SOMFY SLIDYMOOVE Manuel

1.3 Electrical connection of the motor

• For your safety, these operations must be carried out with the power supply switched off.
• The cable clamp supplied must be used.
For all low-voltage cables, ensure that they can withstand traction of 100 N.
Check that the conductors have not moved when this traction has been applied.
1. Connect the earth wire supplied to the top right of the control electronics.
2. Connect the wires as shown in the table:
Wire colour
Blue
Brown / black / red
Yellow and green
Type Terminal
Neutral 17
Live 16
Earth
Replacing the electronic unit
Comments
Screw the earth wire lug of the
electronics, the earth wire lug of the
power supply and the star washer using
the earthing screw .
EN- Replacing the SLIDYMOOVE electronic unit - SOMFY
1
4