Standby / Reactivation Of The Control Electronics; Unlocking/Locking The Motor - SOMFY SLIDYMOOVE Manuel

Commissioning and standard use
2

2.4 Standby / reactivation of the control electronics

Once the auto-programming process has been
completed, the electronics automatically switch
to standby a er 5 minutes of inactivity to save
energy.
In standby mode, all indicator lights are
switched off.

2.5 Unlocking/locking the motor

7
EN- Replacing the SLIDYMOOVE electronic unit - SOMFY
Unlocking
SLIDYMOOVE 300
SLIDYMOOVE 600
To check if the motor is switched on or to check/
modify the parameter setting, press the
for 2 seconds to reactivate the electronics.
Locking
button