Eurofred 3CSA0013 Mode D'emploi page 53

PRESS THE '  ' KEY TO SELECT THE
DESIRED PARAMETER.

SET THE DESIRED VALUE FOR EVERY SINGLE
PARAMETER AS EXPLAINED BELOW.

PRESS THE ' esc ' KEY TO RETURN TO THE USER
PARAMETERS SELECTION MENU.

WAIT 20 SECONDS OR PRESS THE ' esc ' KEY TO QUIT
THE USER MODE.
WARNING!
In the ' USER PARAMETERS ' mode all outputs are
disabled.
Displaying the Maximum Temperatures recorded
Parameter ' TMAX U1 ' allows to display the maximum
temperature recorded in the system for each probe TM-.
PRESS THE '  ' KEY
TO VIEW THE TEMPERATURE.
USING THE '  ' OR '  ' ARROWS IT IS POSSIBLE
TO SCROLL CYCLICALLY THROUGH THE RECORDED
TEMPERATURES:
TM1  TM2  TM3
PRESS THE '  ' KEY. THE DISPLAY SHOWS FLASHING
THE NUMBER OF THE PROBE.
PRESSING THE ' esc ' KEY RETURNS TO SHOWING
THE USER PARAMETERS.
PRESSING '  ' RESETS THE TEMPERATURE
RECORDED TO THAT POINT;
PRESSING ' esc ' RETURNS TO SHOWING THE
MEMORIZED TEMPERATURE.
53



