Eurofred 3CSA0013 Mode D'emploi page 49

A list of the allowed regulation ranges for every single value
is given in the annex ' PARAMETERS '.
P3: ANTIFROST PARAMETER MANAGEMENT
Using this parameter it is possible to set the data managing
the antifrost function.
The control unit is supplied with preset antifrost data
for optimal operation.
Any change to these values must be performed by
qualified personnel only.
AFTER SELECTING PARAMETER P3 PRESS
THE '  ' KEY.

IT IS POSSIBLE TO SCROLL CYCLICALLY THROUGH
ANTIFROST DATA USING THE '  ' OR '  ' ARROWS:
- Antifrost temperature
- Collector pump ignition interval
- Collector pump shut off interval
- Antifrost test duration

PRESS THE '  ' KEY TO MODIFY THE THERMAL DATA
SELECTED; THE DATA WILL START FLASHING.
USE THE
PRESS THE '  ' KEY TO CONFIRM THE PROGRAMMING
OR PRESS THE ' esc ' KEY TO CANCEL THE CHANGES.
BY PRESSING THE '  ' KEY AFTER MODIFYING
THE DATA RELATIVE TO THE DURATION OF THE
ANTIFROST TEST, THE CONTROL UNIT WILL CONFIRM
THE DATA AND WILL START THE TEST.
' TAF '
A list of the allowed regulation ranges for every single value
' P ON '
is given in the annex ' PARAMETERS '.
' P OF '
' TMR '
P4: ACOUSTIC SIGNAL MANAGEMENT
Using this parameter it is possible to enable or disable the
49

'  ' OR '  ' ARROWS TO SET THE
DESIRED NUMERIC VALUE.

