Eurofred 3CSA0013 Mode D'emploi page 46

INSERT THE NEW PASSWORD.

THE DISPLAY SHOWS
' PWDC0000 '.

INSERT NEW PASSWORD.

THE CONTROL UNIT WILL MEMORIZE
THE NEW PASSWORD AND GIVE ACCESS
TO THE INSTALLER PARAMETERS.
Pressing the ' esc ' key at any time will exit the password
management mode.
Using installer parameters
Inserting the correct Password gives access to the installer
parameters change mode (' SET ' icon lights). The first
information displayed is the model of the control unit in use
and the parameter ' P1 ' value.
By pressing the '  ' or '  ' keys it is possible to scroll
through the various parameters.
Pressing the '  ' key takes the user to the parameter
modifying mode selected.
To exit the installer mode press the ' esc ' key or wait
20 seconds.
PRESS THE '  ' KEY ON THE START PAGE.
THE DISPLAY SHOWS ' PWD 0000 '.
INSERT THE CURRENT PASSWORD.
THE DISPLAY SHOWS THE FIRST
' INSTALLER PARAMETER '.
46



