Publicité
Les langues disponibles
Les langues disponibles
PICTURE 9
PICTURE 11
PICTURE 13
FITTING INSTRUCTIONS
•
Starting from the LHS of the engine, remove the top engine nut arrowed in Picture 1 using a
17mm socket and a wrench.
•
Remove the two OEM M6 bolts labelled A in Picture 1 using an 8mm socket and a wrench.
Please note NOT to remove the metal cable clip that hold the wiring from the engine case.
•
On the RHS of the engine, remove the OEM m6 bolts labelled B in Picture 2 using an 8mm
socket and a wrench. Remove the bolts and the metal bracket that holds the HT lead and
wiring.
Unit 1, Shelley's Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301
PICTURE 10
PICTURE 12
R&G Racing
www.rg-racing.com
CP0429
Email:
info@rg-racing.com
Publicité
