Nail Selection - Metabo HPT NV 75A5 Manuel D'instructions Et De Sécurité

SPECIFICATIONS
Operating pressure
Dimensions
Length × Height × Width
Weight
Nail capacity
Air consumption
Air inlet

NAIL SELECTION

Be sure to use only the genuine metabo HPT nails for the NV75A5. The use of any other nails can result in
tool malfunction and/or nail breakdown, leading to serious injuries.
Only nails shown in the Table below can be driven with this Nailer.
Wire-collated coil nails
Sheet-collated coil nails
000Book̲NV75A5̲US̲metabo.indb 9 000Book̲NV75A5̲US̲metabo.indb 9
70 – 120 psi (4.9 – 8.3 bar 5 – 8.5 kgf/cm
10-11/16" × 13-3/8" × 5-3/16"
(271 mm × 339 mm × 132 mm)
5.7 lbs (2.6 kg)
200 – 300 nails (1 coil)
.064 ft /cycle at 100 psi
3
(1.8 ltr/cycle at 6.9 bar)
(1.8 ltr/cycle at 7 kgf/cm
3/8 NPT Thread
WARNING
Wire-collated coil nails
Min. Max.
.236" .283"
(6 mm) (7.2 mm)
.099"
(2.5 mm)
.131"
(3.3 mm)
English
)
2
)
2
Sheet-collated coil nails
Min. Max.
.224" .236"
(5.7 mm) (6 mm)
.090"
(2.3 mm)
.099"
(2.5 mm)
2018/09/21 15:04:28 2018/09/21 15:04:28
9