Specifications; Nail Selection; Accessories - Metabo HPT NR 90AF Manuel D'instructions Et De Sécurité

English

SPECIFICATIONS

Operating pressure
Dimensions
Length × Height × Width
Weight
Nail capacity
Air consumption
Air inlet

NAIL SELECTION

● Be sure to use only the genuine metabo HPT nails for the NR90AF (S1). The use of any other nails can
result in tool malfunction and/or nail breakdown, leading to serious injuries.
Only nails shown in the Table below can be driven with this Nailer.
28 degree off set round head
Framing nails – wire collation
28°

ACCESSORIES

● Accessories other than those shown below can lead to malfunction and resulting injuries.
10
70 – 120 psi (4.9 – 8.3 bar, 5 – 8.5 kgf/cm
21-19/64" × 12-11/16" × 4-15/16"
(541 mm × 322 mm × 125 mm)
7.3 lbs (3.3 kg)
100 nails (4 sticks)
.088 ft /cycle at 100 psi
3
(2.5 ltr/cycle at 6.9 bar)
(2.5 ltr/cycle at 7 kgf/cm
3/8 NPT Thread
WARNING
Min.
.240"
(6.1 mm)
.113"
(2.9 mm)
DANGER
)
2
2)
Max.
.259"
(6.6 mm)
.131"
(3.3 mm)