Nail Selection; Accessories; Standard Accessories; Optional Accessories - Metabo HPT NP 35A Manuel D'instructions Et De Sécurité

English

NAIL SELECTION

● Be sure to use only the genuine metabo HPT
nails for the NP35A. The use of any other
nails can result in tool malfunction and/or
nail breakdown, leading to serious injuries.
Only nails shown in the Table below can be driven with
this Nailer.
23 Gauge pin nails
Min.
.024"
(0.6 mm)

ACCESSORIES

● Accessories other than those shown below
can lead to malfunction and resulting
injuries.

STANDARD ACCESSORIES

10
WARNING
Max.
.024"
(0.6 mm)
WARNING
Eye protection
Allen wrench for M4 screw
Nose cap (A)
Case
Lubricant oiler
OPTIONAL ACCESSORIES ... sold separately
○ Pneumatic tool lubricant
1 oz. (30 cc) oil feeder (Code No. 877153)
4 oz. (120 cc) oil feeder (Code No. 874042)
1 quart (1 ltr) can (Code No. 876212)
NOTE
Accessories are subject to change without any
obligation on the part of metabo HPT.

APPLICATIONS

○ Installation of decorated plywood such as baseboards
and edgings in interiors of buildings.

BEFORE OPERATION

Read section titled "SAFETY" (pages 4–8).
Make sure of the followings before operation.
WORKING ENVIRONMENT
● No fl ammable gas, liquid or other fl ammable
objects at worksite.
● Clear the area of children or unauthorized
personnel.
AIR SUPPLY
● Never connect Nailer to pressure which
potentially exceeds 200 psi (13.7 bar 14
kgf/cm ) if a regulator fails.
2
● Never use non relieving coupler on Nailer.
1
1
2
1
1
WARNING
DANGER
● NEVER use reactive
gases or other bottled
gases. Explosion may
occur.
WARNING