Specifications; Nail Selection; Accessories; Standard Accessories - Metabo HPT NV 75AN Manuel D'instructions Et De Sécurité

English

SPECIFICATIONS

Operating pressure
Dimensions
Length × Height × Width
Weight
Nail capacity
Air consumption
Air inlet

NAIL SELECTION

Be sure to use only the genuine metabo HPT nails for the NV75AN/NV75AN(S)/NV75AN(S1)/NV75AN(S2).
The use of any other nails can result in tool malfunction and/or nail breakdown, leading to serious injuries.
Only nails shown in the Table below can be driven with this Nailer.
Wire-collated coil nails

ACCESSORIES

Accessories other than those shown below can lead to malfunction and resulting injuries.

STANDARD ACCESSORIES

1
10
000Book̲NV75AN̲US.indb 10 000Book̲NV75AN̲US.indb 10
70 – 120 psi (4.9 – 8.3 bar 5 – 8.5 kgf/cm
WARNING
Min.
.236"
(6 mm)
.099"
(2.5 mm)
WARNING
NV75AN, NV75AN(S), NV75AN(S1), NV75AN(S2)
1 Eye protection ..........................................................1
NV75AN, NV75AN(S)
2 Nose cap ..................................................................1
2
NV75AN, NV75AN(S1)
3 Sequential actuation trigger kit .................................1
3
12-21/64" × 12-7/16" × 5-13/64"
(313 mm × 316 mm × 132 mm)
6.3 lbs (2.9 kg)
200 – 300 nails (1 coil)
.085 ft /cycle at 100 psi
3
(2.4 ltr/cycle at 6.9 bar)
(2.4 ltr/cycle at 7 kgf/cm )
2
3/8 NPT Thread
(7.2 mm)
(3.3 mm)
)
2
Max.
.283"
.131"
2018/03/22 15:46:38 2018/03/22 15:46:38