Metabo HPT NV 75A5 Manuel D'instructions Et De Sécurité page 20

English
• When attaching, use a hexagonal bar wrench for M5
(separate).
• Fix the hook (1) to the main unit in three locations
using the M5 16 fl ange bolts (2) (Fig. 1).
×
Fastening Torque
8.3±0.5 N m 6.1±0.4 ft.lbs
•
• The hook can be attached in any direction. Adjust the
hook according to the operating environment (Fig. 2).
(2) How to detach the hook
Detach the hook by reversing the aforementioned
steps for attaching the hook.
WARNING
When the hook is attached, operate only
with SINGLE SEQUENTIAL ACTUATION
MECHANISM and
ACTUATION MECHANISM. For switching
between SINGLE
CONTACT, see the appropriate section in
"METHODS OF OPERATION".
Disconnect the air hose when hook the unit.
Do not hook on high or unstable locations.
Also, do not hook it to the body, clothing, belt
or other personal items.
20
000Book̲NV75A5̲US̲metabo.indb 20 000Book̲NV75A5̲US̲metabo.indb 20
85±5 kgf cm
•
not with CONTACT
SEQUENTIAL and
2018/09/21 15:04:30 2018/09/21 15:04:30