Power One AURORA PVI-3.8-I-OUTD Manuel D'utilisation Et D'installation page 81

Installation and operating manual
(PVI-3.8/4.6-I-OUTD Rev.: 1.5)
•
On the start-up page, the selected inverter will now be shown. Right-click on
the S/N of the inverter and click "Autotest".
•
Select the test or tests of interest (check max voltage, check min voltage,
check max frequency, check min frequency), checking off the corresponding
check boxes and clicking on the start button to launch the test.
Page 80 of 95