Autotest Procedure By Using Aurora Communicator - Power One AURORA PVI-3.8-I-OUTD Manuel D'utilisation Et D'installation

Installation and operating manual
(PVI-3.8/4.6-I-OUTD Rev.: 1.5)
5.6

AUTOTEST PROCEDURE BY USING AURORA COMMUNICATOR

The Autotest procedure can be carried out by using the AURORA Communicator
software, included in the CD provided.
To carry out autotest, follow the procedure below:
Install the AURORA Communicator software on your PC.
-
Connect the inverter to the PC by using the RS485/UBS converter
-
Start-up the AURORA Communicator software
-
The start-up screen will be displayed:
Page 78 of 95