Led Status - Power One AURORA PVI-3.8-I-OUTD Manuel D'utilisation Et D'installation

Installation and operating manual
(PVI-3.8/4.6-I-OUTD Rev.: 1.5)
The following table shows all the possible combinations of LED activation, with
reference to the operational state of AURORA.
Key:

LED STATUS

green:
yellow:
1
red:
green:
yellow:
2
red:
green:
yellow:
3
red:
green:
yellow:
4
red:
green:
yellow:
5
red:
LED on
LED flashing
LED off
Any of the aforementioned conditions
OPERATIONAL
STATUS
AURORA self-
disconnection at night
AURORA initialization,
loading settings and
waiting for grid check
AURORA is transferring
energy to the grid
Anomaly detected in the
system isolation device
Anomaly – fault!!!
Page 49 of 95
NOTES
Input voltage less than 90
Vdc for both inputs
It is in a transition status
needed for checking the
operating conditions
The machine is operating
normally (search for the
maximum power point or
constant voltage)
Leakage to the ground
detected
The fault may an internal or
external anomaly, see the
report on the LCD display