Electrical Connection - Power One AURORA PVI-3.8-I-OUTD Manuel D'utilisation Et D'installation

Installation and operating manual Page 5 of 95
(PVI-3.8/4.6-I-OUTD Rev.: 1.5)
GENERAL
When the inverter is operating, there can be parts that are live, or non-isolated, and in
some cases also moving or rotating, and, in addition, some surfaces may become hot.
Unauthorized removal of required protections, improper use, faulty installation or
incorrect operation may cause serious damage to persons and things.
All operations concerning transport, installation, commissioning, and maintenance
must be carried out by qualified and trained personnel only (all national standards
for the prevention of accidents must be respected!!!).
According to this basic safety rules, qualified and trained individuals must be experts
in the mounting, assembly, commissioning, and operation of the product, and must and
have the necessary skills, qualifications and requisites to carry out their tasks.
ASSEMBLY
The devices must be assembled and cooled down in accordance with the specifications
outlined in the relevant documentation.
In particular, during transportation and handling, the components must not be bent,
and the isolation distances must not be changed. There must be no contact between
electronic components and connection terminals.
Electrical components must not be mechanically damaged or destroyed (potential risk
for health).

ELECTRICAL CONNECTION

When working with the live inverter, national regulations regarding accident
prevention must be respected.
Electrical installation must be carried out in accordance with the relative regulations
(e.g. conductor sections, fuses, PE connection).