Power One AURORA PVI-3.8-I-OUTD Manuel D'utilisation Et D'installation page 23

Installation and operating manual
(PVI-3.8/4.6-I-OUTD Rev.: 1.5)
NO Derating
-5°
Derating
AURORA must be mounted vertically. Follow the information contained in the
following paragraphs in order to mount the device correctly.
NOTE. It is recommended to install AURORA away from direct sunlight
and heat sources, including heat generated by other AURORA inverters (see
Fig. 5)
When the ambient temperature exceeds 50°C for PVI-4.6-I-OUTD models, and 60°C
for PVI-3.8-I-OUTD models, the inverter will self-derate the output power.
In order to avoid overheating, always ensure that the airflow around AURORA is not
blocked.
0°
5°
Derating
Fig. 6 - Titled mounting
Derating
Page 22 of 95