Data Types Available; Real-Time Operational Data - Power One AURORA PVI-3.8-I-OUTD Manuel D'utilisation Et D'installation

Installation and operating manual
(PVI-3.8/4.6-I-OUTD Rev.: 1.5)
5.2

Data types available

AURORA supplies two types of data which can be read through the display and/or
through the appropriate interface software.
5.2.1

Real-time operational data

Real-time operational data can be transmitted on demand through the communication
lines, and will not be internally registered inside the inverter. For transmitting data to a
PC, the free AURORA Communicator software can be used. This software is included
in the installation CD (please check the website www.power-one.com for the latest
updated version).
The following data is available:
Grid voltage
Grid current
Grid frequency
Power transferred to the grid
Voltage of photovoltaic array 1
Current of photovoltaic array 1
Voltage of photovoltaic array 2
Current of photovoltaic array 2
Temperature of internal semiconductors
Serial number of Code
Week of production
Firmware revision code
Daily energy
System earth leakage current
Total energy
Partial energy
Mean grid voltage
Isolation resistance
Leakage current to the ground
Date, time
Daily peak power
Absolute peak power
Input power
Page 46 of 95