Power One AURORA PVI-3.8-I-OUTD Manuel D'utilisation Et D'installation page 7

Installation and operating manual
(PVI-3.8/4.6-I-OUTD Rev.: 1.5)
OPERATION
The system in which the inverters are installed must be equipped with further control
and protection devices, in accordance with the relative applicable safety standards, e.g.
compliance with technical equipment, accident-prevention regulations, etc. Calibration
variations are possible through the use of the operational software. After having
disconnected the inverter from the mains grid, the live parts and the electrical
connections must not be touched for a while, as capacitors may still be charged. For
this reason, all the related signs and marks present on the devices must observed.
During operation, all covers and doors must be closed.
MAINTENANCE AND ASSISTANCE
The manufacturer's documentation must be observed.
KEEP ALL DOCUMENTATION IN A SAFE PLACE!
Page 6 of 95