Power One AURORA PVI-3.8-I-OUTD Manuel D'utilisation Et D'installation page 51

Installation and operating manual
(PVI-3.8/4.6-I-OUTD Rev.: 1.5)
green:
yellow:
red:
6
Green:
yellow:
7
red:
NOTE: In correspondence with each of the inverter states, signaled via the
constant or intermittent lighting up of the relevant LED, a message
identifying the operation which is being performed or the fault/defect
detected will also be displayed on AURORA LCD display (see the
following paragraphs).
Installation phase:
AURORA is
disconnected from the
grid.
Disconnection from the
grid
Page 50 of 95
During installation, it
indicates the address setting
phase for RS-485
communication
Indicates that the grid is
missing