Power One AURORA PVI-3.8-I-OUTD Manuel D'utilisation Et D'installation page 55

Installation and operating manual
(PVI-3.8/4.6-I-OUTD Rev.: 1.5)
Wrong Mode
Over Temp.
Cap. Fault
Inv. Fail
Int.Error
Ground F.
Int.Error
Int.Error
Int.Error
Int.Error
Int.Error
Int.Error
Int.Error
Int.Error
Int.Error
Int.Error
Fan Fail
Int.Error
IGBT not
ready
Remote OFF
Int.Error
Int.Error
Int.Error
// E013
// E014
// E015
// E016
// E017
// E018
// E019
// E020
// E021
// E022
// E023
// E024
// E025
// E026
// E031
// E032
W010 //
// E033
// E034
// E035
// E036
W012 //
W013 //
Wrong Input setting (Single instead of dual)
Wrong setting of inputs (single channel instead of
Overtemperature
Internal temperature too high
Bulk Capacitor Fail
Bulk capacitor failure
Internal error
Internal error
High leakage current or incorrect ground mode
Ileak Sensor fail
Leakage current error
Output relay self test fail
Output relay self test failed
Output relay self test fail
Output relay self test failed
Output relay self test timeout
Output relay self test failed
Dc-Injection Error
Internal Error
Riso Low (Log Only)
Isolation resistance low (log only)
Internal error
Output relays fail
Output relays fault
Unbalanced output currents
Output currents unbalanced
Fan Fail (No disconnection)
Fan failure (log only)
Under Temperature
Internal temperature too low
Internal Error
Remote Off
Vout Avg
Average output voltage out of range
Clock Battery Low (No disconnection)
Clock battery low
Clock Failure (No disconnection)
Clock does not work
Page 54 of 95
dual)
I leak fail