Care And Cleaning; Removing Oven Door; Replacing Oven Light - Amana AOGD2750 Serie Mode D'emploi

Care and Cleaning

Removing Oven Door

!
To avoid personal injury or property damage, handle
oven door with care.
• Door is heavy and can be damaged if dropped.
• Avoid placing hands in hinge area when door is
removed. Hinge can snap closed and pinch hands.
• Do not scratch or chip glass, or twist door.
Glass may break suddenly.
• Replace door glass if damaged.
• Do not lift door by handle.
1. Open door fully.
2. Remove screws.
• Oven doors are attached with a screw on each side
of oven door.
3. Close door to first stop, grasp door firmly on each
side, and lift upward until door is off hinges.
• Do not lift door by handle. Glass or handle can
break.
• Only push hinges closed once oven door is
removed if necessary. Use both hands when
closing hinge. Hinge snaps closed.
Removing Oven Door
CAUTION

Replacing Oven Light

!
To avoid risk of burns or electrical shock, disconnect
electrical supply to oven before changing light bulb.
• Before replacing light bulb make sure bulb and lens
are cool.
• Wear protective gloves.
• Do not operate oven without bulb and lens cover in
place.
1. Disconnect electrical supply.
2. Remove oven door if desired.
3. Unscrew light bulb cover (counterclockwise) located
in rear of oven cavity. Then turn light bulb
counterclockwise to remove.
4. Replace light bulb with 120-volt, 40-watt appliance
bulb.
• Do not overtighten bulb or it may be difficult to
remove later.
5. Replace light bulb cover and oven door before use.
6. Reconnect power supply.
Replacing Oven Light
22
WARNING