Intended Use; Product Description - Kessel EasyClean free Standard Instructions D'installation Et D'utilisation

2.3

Intended use

The product is a system for separating grease out of domes-
tic or commercial wastewater per DIN EN 1825. Greases
are substances of vegetable origin and/or animal origin with
a density of less than 0.95 g/cm3, which are partially or
completely insoluble in water or saponifiable. Disposal and
maintenance cycles as well as requirements concerning the
installation site must be complied with for proper operation.
All:
modifications or attachments
use of non-genuine spare parts
repairs carried out by companies or persons not autho-
rised by the manufacturer
without the express and written approval of the manufacturer
can lead to a loss of warranty.
2.4

Product description

The system can be purchased with or without an inspection
window, as well as with or without refill inlet. Inlet and outlet
can be interchanged. Conversion of the system for partial or
full automation of the disposal process is possible with spe-
cific retrofit kits.
In addition, the system is available as a variant with direct
disposal pipe (EasyClean Direct). The direct disposal pipe
makes disposal possible via a Storz B coupling attached
outside the building e.g. in a disposal chamber (KESSEL
accessories).
Pos. Component
no.
(1) Inlet
(2) Service access cover (inlet side)
(3) Refill inlet (optional)
(4) Service access cover (outlet side)
(5) Outlet
18 / 82 016-185_01