Person
Operating company
Technical expert, (familiar with,
understands operating instructions)
Technical specialist, (technical worker,
in accordance with installation instruc-
tions and execution standards)
2.3
Intended use
The backwater pumping station serves as a draining system
for wastewater without sewage, domestic or industrial waste-
water.
The system is resistant to the usual domestic acids and alka-
lis. Condensate from condensing boilers must be neutralised
or diluted. Alternatively, a chemical-resistant customised
solution can be purchased (individual@kessel.de). The sys-
tem must be installed in a building to guarantee frost protec-
tion.
The system contains a type 5 backwater valve. If water
consumers are running during backwater, the wastewater
incurred is pumped away against backwater pressure.
Art. no.
Designation
32500
Upper section
18 / 92
Approved activities on KESSEL systems
Visual check
Emptying, cleaning
(inside), functional check
Art. no.
850114, 850116
Note on warranty
2.4
The backwater pumping station for wastewater without
sewage is equipped with one pump and two mechanical
backwater valves which close automatically in the event of
Installation loca-
backwater.
tion
Deeper installation
Installation and operating manual
Installation, replacement, mainte-
nance of components, connection
to power supply, commissioning
Designation
Conduit pipe seal
Only KESSEL accessories designed for the product may
be used. If any modifications are made to the product or
non-original accessories are used, the warranty becomes
null and void.
Product description
Installation loca-
tion
Additional pipes
016-168