Strap Cap Installation Instructions - Sunrise Medical Whitmyer Notice D'utilisation

The STRAP CAP is an accessory option available for the Dynamic Forehead Strap
System. The cap replaces the strap only of the DYNAMIC FOREHEAD STRAP
SYSTEM and is compatible with all DFS System applications.
1. Follow the hardware installation instruction for the DFS System.
2. Follow the fitting instructions for the DFS System.
Sizing the Strap Cap
Include the following step to custom size the cap to
the user's head:
Insert or remove one or both pieces of pre-shaped
foam (A) from the hook and loop pouch on the
inside top of the cap (Fig.1). Inserting or removing
a piece of foam will raise or lower the cap's position
on the head.
READ THE WARNING LABEL ON THE BACK OF THE DFS UNIT
Dynamic Forehead Strap with strap cap option
Pulley Mechanism
Warning Label
Forehead Strap
The Strap Cap is compatible
with all Whitmyer Biomechanix,
Dynamic Forehead Strap
systems.
Head Support Instructions

Strap Cap Installation instructions

Tension Adjuster
Strap
Cap
Cord
Tension Adjuster
Fig. 1
Foam Insert Pouch
(Cut-Away View)
www.sunrisemedical.com | 28