Anterior Support Attachment to Single Pad Interface
1. Remove bolts (Fig. 1, A) and discard bottom collar half (Fig. 1, B) of pad.
2. Evenly clamp the horizontal ball (Fig. 1, C) between the pad collar half (Fig. 1, D) and anterior support
interface (Fig. 1, E).
3. Refer to Fig. 2. Remove bolt (Fig. 2, A) and washer (Fig. 2, B) from anterior support mount (Fig. 2, C).
4. Align bolt (Fig. 2, A) and washer (Fig. 2, B) through the anterior support adapter bracket slot (Fig. 2, D)
clamping the anterior support option in place.
5. Adjust to user. See page 26-30.
Anterior Support Attachment to S.O.F.T. Base Plate Assemblies. (Fig. 3)
1. Remove bolt (A) and washer (B) from anterior support mount (C).
2. Align bolt (A) and washer (B) through the occipital mount slot (D) clamping the anterior support option
in place.
3. Adjust to user. See page 26-30.
A
Head Support Instructions
Anterior Support Attachment
D
A
B
C E
Fig. 1
C
B
D
C
B
A
D
Fig. 2
Fig. 3
www.sunrisemedical.com | 14