Linx Mounting System - Sunrise Medical Whitmyer Notice D'utilisation

1. Assemble and position as shown in Fig.1. Index pin on anti-rotational collar
(Fig.1,C) fits in to slot in top of detach receptacle (Fig.1, D) to prevent rotation.
2. See pages for pad and accessory attachment / adjustments:
Pad(s)- page 13
Base plate assembly – page 14 Lateral Supports – page 16-18
Adjustments
1. Vertical - Loosen the lever knob (Fig. 1, E) and adjust to the proper height and then
lower the stop collar (Fig. 1, C) be sure to align the index pin in the slot on the detach
mount. (Fig. 1, F) Vertical rod may be rotated for additional angle adjustment of pad/
base plate assembly.
2. Horizontal / Vertical – Loosen clamp screws (Fig. 1, A & B) for depth and height
adjustment (Fig. 2).
3. Tighten all collar screws evenly to reach full locking strength. See page 11.
A
B
E
Head Support Instructions

Linx Mounting System

Anterior Supports – page 15, 20-21
C
F
D
Fig. 1
A
Fig. 2
B
Fig. 3
www.sunrisemedical.com | 9