Installation And Setting - Meister BEH 600 C Traduction Du Manuel D'utilisation Original

5410050-Elektrohob-man 21.02.14 13:58 Seite 51
up against your body, it will be
unstable which may lead to a loss of
control.
Safety marking
The symbols on the housing mean the
following:
Do not dispose of with
domestic waste!
Important! Observe
operating instructions!
Always protect eyes and
ears.
„Tested Safety" voluntary
quality mark
CE Mark (conformity to
European safety standards)
Housing is double insulated
Fire prevention
Fire-preventive measure when
machining wood: keep a powder- or
CO -extinguisher handy!
2
7 – Installation and setting
Risk of injury. Before carrying
out any fitting work on the
appliance, unplug it from the mains!
Fitting collecting bag
Risk of injury. Always unplug
from mains before changing bits!
All manuals and user guides at all-guides.com
To avoid inhaling harmful wood dust,
always work with the collecting bag
fitted!
a
b
5
c
Insert stabilising rod (a) into the
adapter (b). Slip collecting bag (5) over
the adapter. Insert adapter into the
shavings ejector hole (8). Close zip (c).
Setting planning depth
Set the desired depth (0 to 2.0 mm) by
turning the depth setting knob (1). The
arrow on the housing will point to the
set value.
Cutting depths of over 2 mm must be
planed in more than one pass.
Fitting fence and depth stop
8
Risk of injury. Always unplug
from mains before setting!
1
Risk of injury. Always unplug
from mains before changing bits!
51