Ec Declaration Of Conformity - Amano American Sanders FloorCrafter Manuel De L'opérateur

We, Amano Pioneer Eclipse Corp. (1 Eclipse Road, PO Box 909, Sparta NC28675, USA) with authorized EU representative
(see info under section importer) declare under our sole responsibility that the following described equipment in our delivered
version complies with the appropriate basic safety and health requirements of the above-mentioned Directives based on its
design and type, as brought into circulation by us. In case of alteration of the machine, not agreed upon by us, this
declaration will lose its validity.
Applicable EC Directives:
Electromagnetic Compatibility Directive 2014/30/EU of 26 February 2014
-
Low Voltage Directive 2014/35/EU of 26 February 2014
-
Machinery Directive 2006/42/EC + Amending Directive 95/16/EC of 17 May 2006
-
Restriction of the use of certain hazardous substances in electrical and electronic equipment Directive
-
2011/65/EU of 8 June 2011
Applicable Harmonized Standards:
Type of Equipment:
Model Number(s):
Description(s):
Serial Number:
Year in which CE marking was affixed:
Place: Sparta
Date: 10/14/2020
Importer's Name:
Importer's Address:

EC Declaration of Conformity

EC DECLARATION OF CONFORMITY
according to
EC Machinery Directive 2006/42/EC
EN 60335-1:2010 + Corr.1:2010 + Corr.2:2011 + A1:2013 + Corr.1:2014
EN 60335-2-72:2012, EN 62233:2008, EN 55014-1:2006 + A1:2009 +A2:2011
EN 55014-2:1997 + A1:2001 + A2:2008, EN 61000-3-2:2014
EN 61000-3-3:2013, EN 50581:2012,
Commercial Wood Floor Sander
07239A
FloorCrafter 230V / 50Hz
2020
Signature:
Name:
Position:
Date:
Name and Signature:
84