Amano American Sanders FloorCrafter Manuel De L'opérateur page 6

EN
Additional Rules For Safe Operation
1. Empty the dust bag or dust collection receiver frequently. Do not leave residue in dust bag or dust collection receiver unattended.
Always empty into a non-combustible metal container. Sanding wood or varnish produces dust that can self ignite and cause injury or
damage. Always empty dust bags or collection receiver before storing the machine.
2. Set all exposed nails. Sweep loose abrasive away from work area. Do not strike metal pipes etc., with sanding paper. Striking metal
or abrasive particles with sanding paper produces sparks that could ignite the sanding dust which can cause injury or damage.
3. Do not operate a partially assembled power tool. Keep all adjustments within manufacturer's specifications. Keep all fasteners tight.
Operating a partially assembled power tool could result in injury to the operator or bystander and could cause damage to the equipment
or surroundings.
4. Do not attempt to change the sanding paper while the power tool is running. The sanding drum can snag clothing and cause injury to
limbs, and moving sanding paper can cause abrasions.
5. The power tool should only be used on an electrical system (mains) that is rated for the electrical requirements of the power tool as
shown on the nameplate. Use only on an earthing (grounded) system. Do not service the power tool if it is energized or connected to
an electrical circuit. Improper use could cause fire or electric shock.
General Power Tool Safety Warnings
6