General Power Tool Safety Warnings - Amano American Sanders FloorCrafter Manuel De L'opérateur

EN
WARNING: Read all safety warnings and instructions. Failure to follow warnings and instructions may result in electric shock, fire
and or serious injury.
Save all warnings and instructions for future use.
Safety Warnings For Sanding Operations
1. This power tool is intended to function as a sander. Read all safety warnings, instructions and specifications provided with this power
tool. Failure to follow all instructions listed below may result in electric shock, fire, or personal injury.
2. Operations such as grinding, wire brushing, polishing or cutting-off are not recommended to be performed with this power tool.
Operations for which the tool was not designed may create a hazard and cause personal injury.
3. Do not use accessories which are not specifically designed and recommended by the tool manufacturer. Just because the accessory can
be attached to your power tool does not assure safe operation.
4. Wear personal protective equipment. Depending on application, use face shield, safety goggles or safety glasses. As appropriate, wear
dust mask, hearing protectors, gloves and workshop apron capable of stopping flying debris generated by various operations. The eye
protection must be capable of stopping flying debris generated by various operations. The dust mask or respirator must be capable of
filtering particles generated by your operations. Prolonged exposure to high intensity noise may cause hearing loss.
5. Keep bystanders a safe distance away from work area. Anyone entering the work area must wear personal protective equipment.
Fragments of work piece or a broken accessory may fly away and cause injury beyond immediate area of operation.
6. Hold power tool by gripping insulated surfaces (handle) only, when performing an operation where the cutting accessory may contact
hidden wiring or its own cord. Cutting accessory contacting a "live" wire may make exposed metal parts of the power tool "live" and shock
the operator.
7. Position the cord clear of the drum. If you lose control, the cord may be cut or snagged, and the operator or others could be shocked
by a live wire.
8. Do not operate the power tool near flammable materials. Sparks could ignite these materials.
9. Risk of explosion. Floor sanding can result in an explosive mixture of fine dust and air. Use floor sanding machine only in a
well-ventilated area free from any flame or match.

General Power Tool Safety Warnings

5