Lubricating The Sliding Guides; Figure 24 - Lubrication Points; Information For Users - tomaga CHROMATIC 250 Manuel De L'utilisateur

7.2.6 LUBRICATING THE SLIDING GUIDES

The sliding
carriage must
regularly using the oil supplied.
To do this, put a few drops of oil
into the hole located next to the
graduated dial and identified by
the OIL plate. Occasionally, lift
the machine up (Fig. 20) and
lubricate the points indicated by
arrows 1 and 2.
CHAPTER 8 DEMOLITION AND DISPOSAL

INFORMATION FOR USERS

In accordance with Article 13 of Italian Legislative
Decree of 25 July 2005 no. 151 "Implementation of
Directives
2003/108/EC,
hazardous substances in electrical and electronic
equipment, in addition to waste disposal".
The crossed-out rubbish bin symbol shown on the slicing machine indicates that, at
the end of its useful life, the product must be collected separately from other
waste.
The user must, therefore, take the slicing machine which has reached the end of
its life cycle to a suitable collection centre for electronic and electrotechnical
waste or return it to the dealer when purchasing a new, equivalent slicing
machine on a one-for-one basis.
Appropriate separate waste collection for subsequent sending of the disused
slicing machine for recycling, treatment and compatible environmental
disposal contributes
environment and favours recycling of the materials of which the slicing
machine is composed.
The abusive disposal of the product by the user leads to the application of the
penalties envisaged by current regulations regarding the matter.
All manuals and user guides at all-guides.com
guides on the
be lubricated
2002/95/EC,
regarding
to preventing

Figure 24 - Lubrication Points

2002/96/EC
reducing
possible negative
31
and
the use of
effects on the