Installation; Installing The Machine; Description Of Orders; Use Of The Slicing Machine - tomaga IMPERIAL i33 Manuel De L'utilisateur

5. INSTALLATION

5.1. INSTALLING THE MACHINE

If the machine is not equipped with a support column (optional), install it on a flat, soft and dry
surface which is able to support the weight of the machine plus the product to be sliced; see
paragraph 3.1.
Check that there are no obstacles in the way when the wheel is activated, when the carrier is
moving and when the product to be sliced is loaded on the tray.

5.2. DESCRIPTION OF ORDERS

5.2.1. USE OF THE WHEEL
The wheel (1) rotated clockwise moves the carrier with the jagged product-carrying tray and also
rotates the blade at the same time.
5.2.2. SLICE THICKNESS ADJUSTMENT
The slice thickness is adjustable by placing the ruler on the graduated scale (2). Adjustment values:
see paragraph 3.2.
5.2.3. SMALL HANDLE TO MOVE THE UPPER TRAY FORWARD
The small handle (3) enables the jagged upper tray with the product to advance quickly towards
the blade after the product has been loaded or to move away at the end of the slicing operation or
during small movements for the purpose of adjustment.
1
All manuals and user guides at all-guides.com
3
2
p. 24

6. USE OF THE SLICING MACHINE

6.1. LOADING PRODUCTS

• When activating the wheel (1), bring the carrier (2) completely forward (towards the operator);
• Place the upper sliding tray on the right (away from the blade) by activating the small handle
(4);
• Place the product to be sliced on the upper tray and jam it in using the product press (5) by
also adjusting the height;
• Adjust to the desired slice thickness by placing the ruler (6) on the graduated scale from 0
to 10;
• Bring the upper tray with the product (towards the blade) by activating the small handle (4);

6.2. SLICING PRODUCTS

• Activate the wheel turning clockwise exclusively (do not turn it anti-clockwise, as inverse
rotation could seriously damage the machine);
• When the carrier moves forwards (away from the operator), the product will come into contact
with the blade and the slice, guided by the slice protection, and will become detached and
fall into the recovery tray on the left. With respect to very fatty or very soft meat products, or
even if the blade is not completely sharpened, it is preferable to take and support the slice
as it may stick to the blade.
• When the carrier moves backwards (towards the operator), the mechanical device which
advances the upper plate in a crosswise direction towards the blade is activated. The slice
thickness is established by the ruler of the graduated scale.
3
1
5
4
2
6
p. 25
FR
EN
IT
DE