CAME PXC99W Manuel De Programmation page 60

Stop call sequence from phone
(▲)/(▼) STOP FROM PHONE
EVERYBODY'S
If the user presses key 5 on the phone while listening
EVERYBODY'S
to a voice call, ALL subsequent telephone communications (SMS,
voice, Contact-ID) are interrupted automatically
If the user presses key 5 on the phone while listening
YOURS ONLY
to a voice call, ONLY repetitive call-backs to their own number are
interrupted automatically ALL subsequent telephone communica-
tions are still carried out, however (SMS, voice, Contact-ID)
Stop call sequence with code
(▲)/(▼) STOP FROM CODE
EVERYBODY'S
If an event (general, technical, sabotage, etc alarm)
EVERYBODY'S
starts the cycle of telephone calls, it can be interrupted by entering
on the keypad a code/key associated with the areas of competence,
that has the property of disarming areas
If an event (general, technical, sabotage, etc alarm) starts
NONE
the cycle of telephone calls, it CANNOT be interrupted by entering
on the keypad a code/key associated with the areas of competence,
that has the property of disarming areas
Telephone calls priority
LINE PRIORITY
(▲)/(▼)
The priority lets you select the type of network pre-set, from either
the PSTN line or GSM line, for voice calls If the telephone dialler
doesn't find the pre-set network, all the voice calls will be rerouted
onto the secondary network SMS messages are always sent on the
GSM line Digital calls are made only on the PSTN line
Voice calls via PSTN phone line
PSTN
Voice calls via GSM
GSM
Activating remote control by SMS
SMS RMT-CTRL.
(▲)/(▼)
Lets you activate remote control via SMS
Activating remote control by PSTN
PSTN RMT-CTRL.
(▲)/(▼)
Lets you activate access to the voice guide via the PSTN line
Activating remote control by GSM
GSM RMT-CTRL.
(▲)/(▼)
Lets you activate access to the voice guide via the GSM line
(+)/(-)
(+)/(-)
PSTN
(+)/(-)
YES
(+)/(-)
YES (+)/(-)
YES
(+)/(-)
Safe GSM
(▲)/(▼) SAFE GSM
By activating the remote control by GSM you can create a filter
which checks incoming calls against those in the contacts list Or
you can activate access to all the telephones (the access password
will still be required, regardless of whether safe GSM is activated
or not)
Telephones activated for safe GSM
ASSISTANCE PHONES
(▲)/(▼)
########
By activating the remote control by GSM and safe GSM you can
select the telephone numbers the telephone dialler must answer
SKIP ANSWER SERV
(▲)/(▼) SKIP ANSWER SERV
Activated if is set on
PSTN RMT-CTRL.
guide even when there are answer services programmed to answer
before the telephone dialler
If set at YES, call the home number and hang up on the first ring;
repeat the call within the next 60"
Rings from PSTN
PSTN RINGS NO.
(▲)/(▼)
[1..15] 03
Activated if is set on
PSTN RMT-CTRL.
rings after which the telephone dialler will answer
Example1: your home doesn't have an answer service
and you want the telephone dialler to answer after 6
rings.
Telephone options: Remote control from PSTN
Skip answer serv.l ; Rings from PSTN:
NO
Example 2: your home has an answer service that an-
swers after 5 rings.
Telephone options: Remote control from PSTN
Skip answer serv. .
YES
Activating PSTN line control
PSTN LINE CTRL.
(▲)/(▼)
If activated it checks control of the PSTN line If the line is down, a
failure notification is given
Activating GSM line control
GSM LINE CTRL.
(▲)/(▼)
If activated it checks control of the GSM line (field, SIM registration)
If it is not correct a failure notification is given
NO
(+)/(-)
(+)/(-)
NO
(+)/(-)
, it lets you access the voice
YES
(+)/(-)
, it lets you set the number of
YES
;
YES
.
06
;
YES
NO
(+)/(-)
NO
(+)/(-)