Manitowoc SD0302A Manuel D'installation, D'utilisation Et D'entretien page 25

Section 4
Step 17 Refer to step 6 and disassemble components.
After dissembling proceed to step 18.
Step 18 Mix a solution of sanitizer and warm water.
Solution Type Water
Sanitizer 6 gal. (23 L)
Step 19 Use 1/2 of the sanitizer/water solution to
sanitize all removed components. Use a cloth or sponge
to liberally apply the solution to all surfaces of the
removed parts or soak the removed parts in the
sanitizer/water solution. Do not rinse parts after
sanitizing.
Step 20 Use 1/2 of the sanitizer/water solution to
sanitize all foodzone surfaces of the ice machine and bin
(or dispenser). Use a cloth or sponge to liberally apply
the solution. When sanitizing, pay particular attention to
the following areas:
• Side walls
• Base (area above water trough)
• Evaporator plastic parts - including top, bottom and
sides
• Bin or dispenser
Do not rinse the sanitized areas.
Step 21 Install the removed parts, restore power and
place the toggle switch in the ICE position.
Part Number 000006520 11/11
Mixed With
4 oz (120 ml) sanitizer
Maintenance
25