Location Of Controls - SOUNDMASTER NR540 Manuel

LOCATION OF CONTROLS

1) USB Socket
2) Aux-in jack
3) Earphone jack
4) On/off button
5) Radio Encode button
6) LCD display
7) Remote sensor
8) Dial pointer
9) CD tray
10) Record button
11) Source button
12) Skip Down button
13) Skip Up button
14) Stop button
15) Play/Pause button
16) CD tray open/close button
17) Volume knob
18) Power LED indicator
19) Stereo LED indictor
20) AM button
21) FM button
22) CD/USB button
23) Tape button
24) Phono/Aux button
25) Tuning knob
26) Turntable lock screw
27) Spindle adaptor
28) Tone arm lever
29) Turntable speed selector
30) Pick-up holder
31) Cassette eject knob
32) Cassette cover
33) Turntable adjust hole
34) FM antenna socket
35) Main power switch
36) AC cord
37) Line out socket
Caution:
Usage of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation
exposure.
This unit should not be adjusted or repaired by anyone except qualified service personnel.
Precautions for use
Installation

Unpack all parts and remove protective material.

Do not connect the unit to the mains before checking the mains voltage and before all other connections have been made.

Do not cover any vents and make sure that there is a space of several centimeters around the unit for ventilation.
Connection
1. Connect the power cord (36) to AC outlet then switch on the main power switch (35).
2. Turn on the unit by press On/off button (4), if the Power LED indicator (18) light up, it means the power supply is normal. Now
your system is ready to play the music.
2
M_NR540 / English Instruction Manual