SOUNDMASTER NR540 Manuel page 15

Random Random
Off mode --------------
For MP3 disc
(1) repeat 1 (2) repeat 1 folder
Play mode
Repeat single track
Repeat single folder
Repeat all track
Random mode
Off mode
Repeat play
You can listen to the desired tracks or folder repeatedly by this function.
Random play
You can listen to all the tracks or folder in a random order by this function
CD disc programming (by remote control)
Up to 20 tacks can be programmed for CD file and play in any order. Before use, be sure the system is at stop mode before
programming:
1. Set in CD/USB mode & stop the CD playback.
2. Press the "Program" button, "PROG" will appear on LCD display (6). Moreover, it will indicate program no. and digits for track no.
to be programmed.
3. Select a desired track by pressing skip
Press the "Program"
4. button to store the trace into memory.
5. Repeat steps 3 and 4 to enter additional tracks into the memory if necessary.
6. When all the desired tracks have been programmed, press CD "Play/pause" button (15) to play the disc in assigned order.
To cancel the programmed file, Press "Stop" button on remote handset until " PROG" is disappear on LCD display (6)
7.
Playback of MP3 song via USB storage media
Connecting
The system is able to decode and playback all MP3 file which stored in the memory media with USB connecting port.
Set function at CD/USB mode by press CD/USB button (22) and then press source button (11) to select "USB" mode.
1.
2. Plug-in the USB pen-drive with the face up & make sure it going into completely
Connecting the USB upside down or backwards could damage the audio system or the storage media (USB thumb
drive). Check to be sure the direction is correct before connection.
3. The system will start reading the storage media automatically after connecting, and LCD display (6) will show the total number
of MP3 files and total number of folder being detected and start to playback automatically.
4. Repeat the same playback procedure as playing CD/MP3 disc as above
Remark
- The system can detect and read the file under MP3 format only though the USB port.
If connect the system to MP3 player via the USB socket, due to variances in MP3 encoding format, some MP3 player
-
may not be able to play via the USB socket. This is not a malfunction of the system.
Encoding of CD/phono/Cassette/Tuner/Aux-in into MP3 file
The system is able to encode normal CD or turntable to MP3 format and recording at memory media with USB connecting port. The
system will create a music folder name – "RIP" for CD-DA encode, " REC" for Tuner, Aux, Cassette encode and "FROMCD" for
CD-MP3 disc copy and encode bitrate default at 128kbps.
A) CD encoding
I) Encoding 1 track
1. Perform normal playback of the CD track you want to encode & record,
2. Press "RECORD" button (10) during the playback of the desire track and the display will show "
3. Press "RECORD" button (10) again the display will show "
4
(3) repeat all track
Indicator on LCD
display
Random
-----------------
or buttons (13/12).
M_NR540
(4) random (5) off mode
" and "ONE" flashing.
/ English Instruction Manual
" and " " flashing.