Location Of Controls; Important - SOUNDMASTER MCD5550 Mode D'emploi

Masquer les pouces Voir aussi pour MCD5550:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 22

LOCATION OF CONTROLS

1) Turntable cover
2) LCD display
3) Stop
button
/Enter
4) Record button
5) Standby LED indicator
6) On/Standby button
7) Earphone jack
8) USB Socket
9) Cassette door (1)
10) Function button
11) SD card slot
12) Mem/Clock-Adjust button
13) Skip/tuning Down
14) Cassette 1 control key
15) CD tray
16) Play/Pause
/band button
17) Preset EQ button
18) Remote sensor
19) Volume knob
20) Tone control knob
21) Cassette door (2)
22) Folder/Preset Up button
23) Skip/Tuning Up
24) Cassette 2 control key
25) CD tray open/close button
26) Spindle adaptor
27) Turntable speed selector
28) Auto switch
29) Pick-up holder
30) Antenna socket
31) Line out socket
32) Speaker socket
33) AC cord
34) Aux-in jack
Caution:
Usage of controls or adjustments or performance of procedures other than those specified herein may result in hazardous
radiation exposure. This unit should not be adjusted or repaired by anyone except qualified service personnel.

Important:

Since movement of the CD mechanism and the sensitive circuitry may cause interference to the radio tuner nearby, switch this
unit off while operating other radio devices
Precautions for use
Installation
Unpack all parts and remove protective material.
Do not connect the unit to the mains before checking the main voltage and before all other connections have been made.
Do not cover any vents and make sure that there is a space of several centimeters around the unit for ventilation.
Connection
Connect the speaker cable to the speaker terminal located on the rear side of the unit. Put the red cable into the red terminal
1.
and the black cable in the black terminal of the speaker position (left and right). Plug in the AC cord (33) to the AC outlet. The
unit will go to standby mode and the LCD display (2) will dim light up.
Turn on the unit (6), if the LCD display (2) is on with backlighting, it means the power supply is normal. Now your system is
2.
ready to play the music.
button
button
MCD5550 / English Instruction Manual
2

Publicité

Table des Matières
loading

Table des Matières