SOUNDMASTER NR540 Manuel page 16

4. Press "RECORD" button (10) again, the system will flashing with "
5. After completing of recording, unit will stop playback automatically.
6. Press " stop " button (14) to interrupt the recording mode anytime.
7. For encode whole CD track, pls stay CD in stop mode then press "RECORD" button (10) three times until the display
flashing "
Remark:
- The recording speed is 1:1 and according to the actual plying time of the CD track
The recording format is preset at – MP3 bit rate:
-
- No song title will be recorded during encoding mode
- To interrupt the recording, press the "Stop" button (14) during record mode
8.
If putting a MP3 disc instead of a CD-disc, the system will copy the files to the USB if press the "Record" button. The operation
procedures is same as CD encoding as stipulate on above, and the system will switch to copy mode only if MP3 file being read.
B) Phono/Cassette encoding
1) Set the function button to "Phono or Cassette" mode and then press the "Record" button (10) directly.
The LCD display will flashing "CHECK" a while then display "
2)
encoding mode.
3) Start playback at phono or cassette for the track which you want to record to USB
4) After finish of recoding, press the "Stop" button (14) until the LCD stop flashing and return to "Phono or Tape" mode.
C) Aux-in encoding
1) Connect the Aux-in jack with the device which you want to record
2) Set the function button to "Phono/Aux-in" mode and then press the "Record" button (10) directly.
The LCD display will flashing "CHECK" a while then display "
3)
encoding mode.
4) Start playback at phono or cassette for the track which you want to record to USB
5) After finish of recoding, press the "Stop" button (14) until the LCD stop flashing and return to "Phono or Tape" mode.
D) Tuner encoding
Set the function button to "
1)
display will light up and appear "RADIO". Then press the " Record" button (10) directly.
2) The LCD display will flashing "CHECK" a while then display "
encoding mode.
3) After finish of recoding, press the "Stop" button (14) until the LCD stop flashing and return to "Tuner" mode.
E) Track separation (by remote handset)
You can divide the recording music from phono/Cassette/Tuner to USB track by trace during encoding. Every time when press the
" " (track separation) button once at remote handset during encoding from phono/tape/radio to USB, the system will generate a
new track and continuous the recording. The current text at LCD display will flashing one time, it mean the unit is creating a new
track successfully.
Removing of USB
To remove the USB, turn off the power or switch the function mode to either CD or tuner first. For USB port, unplug it by pulling out
the USB socket directly.
", then system will start to playback CD and encoding whole disc.
AM/FM" mode and tune to desired station for encoding, press the Radio encode button (5), LCD
" icon. Encoding is performing now.
128 kbps, sampling rate: 44.1khz
" & "
" & "
" & "
M_NR540 / English Instruction Manual
" are flashing. Now the system is starting the
" are flashing. Now the system is starting the
" are flashing. Now the system is starting the
5