Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
Storage During Working
Breaks
Non-observance of the storage
instructions can cause starting
problems or permanent damage
as a result of fuel residues in the
carburettor.
In case of working breaks of less than
3 months:
1. Drain the fuel tank in a well-ventilated
place.
2. Start the engine and allow it to tick
over until the engine stops and the
carburettor is free of fuel.
3. Allow the engine to cool (approx. 5
minutes).
In case of working breaks of more than
3 months:
4. Loosen the spark plug with a spark plug
wrench (see "Changing/Adjusting the
Spark Plug").
5. Pour a teaspoon of pure 2-stroke oil
into the combustion chamber and pull
the starter cable slowly several times to
distribute the oil inside the engine.
6. Reinsert the spark plug.
Disposal / Environmental
Protection
Do not allow used oil and petrol residues
into the sewer system or drains.
Dispose of used oil and petrol residues
in an environmentally friendly way – take
them to a disposal point.
Take the equipment, accessories and
packaging for environmentally friendly
recycling.
Machinery does not belong in domestic
waste.
Drain the petrol tank carefully and take
your equipment to a recycling point. The
plastic and metal components used can be
separated by type and therefore recycled.
We will dispose of the defective equipment
you send in, free of charge. Ask your dealer
about this.
Technical Specifications
Engine . Single-cylinder two-stroke engine
Fuel Mix ............................................. 40:1
Engine capacity ............................. 25 cm³
Max. engine power ..........0.8 kW (1.1 HP)
Engine tick over speed .............. 3080 rpm
Max. shaft speed ..................... 10500 rpm
Engine speed at recommended
max. shaft speed ....................... 8000 rpm
Fuel consumption at
max. engine power .....................0.35 kg/h
Spec. fuel consumption ...... 0,460 kg/kWh
Tank capacity ............................... 500 cm³
Weight (no cutting tool,
Empty tank) .....................................5.1 kg
Metal cutting blade
Threads
Cutting radius ........................... 430 mm
Thread thickness .......................... 2 mm
Thread length .............................2 x 3 m
Sound pressure level
(L
) ....................... 99.5 dB(A), K
pA
Sound power level (L
Guaranteed............................... 112 dB(A)
Measured.............. 109.7 dB(A); K
Vibration (a
) ........... 9.839 m/s
h
Technical and visual changes may be
made without notice in the course of de-
velopment. All dimensions, information
and specifications in these operating in-
structions are therefore subject to change.
Legal claims made on the basis of the
operating instructions can therefore not be
enforced.
GB
=2 dB
pA
)
WA
=2 dB
WA
, K=1.5 m/s
2
83
2
Publicité
Table des Matières
