Operation; Working Safely; Turning On And Off - Grizzly EKHS 500-45 2in1 Traduction De La Notice D'utilisation Originale

Operation

Please observe local regulations
concerning noise protection.

Working Safely

• Always wear appropriate clothing,
eye and ear protection and a protec-
tive helmet when working with this
device.
• Maintain the device and the cutting
equipment in good condition to avoid
injuries.
• Check that the carrying strap is in a
comfortable position that makes it
easier for you to hold the device.
• Always hold the device tightly with
both hands, with one hand on the
handgrip (
on the front handgrip (
thumbs and fingers must firmly sur-
round the handles.
• Check the device for significant
damage or defects after it has been
dropped, become blocked or come
into contact with foreign bodies.
• Do not use the device when you are
standing on a ladder or a surface that
is not stable.
• Do not be tempted to make cuts that
you have not carefully considered.
This could endanger yourself or oth-
ers.
• Change your working position regu-
larly. Prolonged use of the device can
lead to blood circulation disorders in
the hands caused by vibration. You
can, however, extend your machine
use time by wearing appropriate safe-
ty gloves or by taking regular breaks.
Please ensure that if you are suscep-
7) and the other hand
14). Your
tible to poor circulation, low outside
temperatures or strong gripping forces
while working, this may reduce the
length of time for which you are able to
work.

Turning on and off

Maintain a firm stand and hold the
appliance well with both hands
and at some distance away from
your body. Before turning on the
appliance, check that it will not
touch any objects.
Starting with the telescopic tube
1. Put on the shoulder strap (
2. To turn on, use your thumb to
actuate the switch lock (10), then
press the On/Off switch (8). Re-
lease the switch lock. There is
no continuous operation mode.
3. To turn off, release the On/Off
switch (8).
Starting without the
telescopic tube
1. Press the safety switch (20) on
the front handgrip (14).
2. To turn on, use your thumb to
actuate the switch lock (9), then
press the On/Off switch (8). Re-
lease the switch lock. There is
no continuous operation mode.
3. To turn off, release the On/Off
switch (8).
After turning off the appliance,
the trimming assembly will keep
revolving for some time. Allow
the trimming assembly to come
to a standstill. Neither touch nor
slow down the moving cutting
insert. Risk of injury!
GB
16).
63